Vernier Caliper Simulator

Vernier caliper reading practice

On this page
  1. How to read each picture
  2. Questions 1–4: 0.1 mm caliper
  3. Questions 5–8: 0.05 mm caliper
  4. Questions 9–12: 0.02 mm caliper
  5. Questions 13–16: 0.001 in caliper
  6. Questions 17–20: 1/128 in caliper
  7. Questions about the practice

Twenty pictures of vernier scales, drawn to scale by the simulator: four on each common caliper, from the coarse 0.1 mm to the fractional 1/128 in. Read each one, write your answer down, then open the answer to check it and see the working.

How to read each picture

  1. Find the vernier zero, the first line of the lower scale. The last main-scale line at or before it is the main scale reading.
  2. Find the one vernier line that sits exactly in line with a main-scale line, and count which line it is from the vernier zero.
  3. Multiply that line’s number by the least count, engraved at the right of the vernier. That is the fine part.
  4. Add the two: reading = main scale reading + (matching line × least count).

The reading guide explains each step with a worked example, and the least count guide shows where each least count comes from.

Questions 1–4: 0.1 mm caliper

  1. Question 1: the main scale and vernier scale of a 0.1 mm vernier caliper.
    Question 1. What is the reading? Least count 0.1 mm.
    Show answer

    80.3 mm

    Main scale reading: 80 mm. Matching line: 3.

    Reading = 80 + (3 × 0.1) = 80 + 0.3 = 80.3 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  2. Question 2: the main scale and vernier scale of a 0.1 mm vernier caliper.
    Question 2. What is the reading? Least count 0.1 mm.
    Show answer

    20.8 mm

    Main scale reading: 20 mm. Matching line: 8.

    Reading = 20 + (8 × 0.1) = 20 + 0.8 = 20.8 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  3. Question 3: the main scale and vernier scale of a 0.1 mm vernier caliper.
    Question 3. What is the reading? Least count 0.1 mm.
    Show answer

    82.8 mm

    Main scale reading: 82 mm. Matching line: 8.

    Reading = 82 + (8 × 0.1) = 82 + 0.8 = 82.8 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  4. Question 4: the main scale and vernier scale of a 0.1 mm vernier caliper.
    Question 4. What is the reading? Least count 0.1 mm.
    Show answer

    37.3 mm

    Main scale reading: 37 mm. Matching line: 3.

    Reading = 37 + (3 × 0.1) = 37 + 0.3 = 37.3 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

Five more questions on the 0.1 mm caliper, with feedback after each answer.

Questions 5–8: 0.05 mm caliper

  1. Question 5: the main scale and vernier scale of a 0.05 mm vernier caliper.
    Question 5. What is the reading? Least count 0.05 mm.
    Show answer

    70.85 mm

    Main scale reading: 70 mm. Matching line: 17.

    Reading = 70 + (17 × 0.05) = 70 + 0.85 = 70.85 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  2. Question 6: the main scale and vernier scale of a 0.05 mm vernier caliper.
    Question 6. What is the reading? Least count 0.05 mm.
    Show answer

    22.05 mm

    Main scale reading: 22 mm. Matching line: 1.

    Reading = 22 + (1 × 0.05) = 22 + 0.05 = 22.05 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  3. Question 7: the main scale and vernier scale of a 0.05 mm vernier caliper.
    Question 7. What is the reading? Least count 0.05 mm.
    Show answer

    85.15 mm

    Main scale reading: 85 mm. Matching line: 3.

    Reading = 85 + (3 × 0.05) = 85 + 0.15 = 85.15 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  4. Question 8: the main scale and vernier scale of a 0.05 mm vernier caliper.
    Question 8. What is the reading? Least count 0.05 mm.
    Show answer

    116.20 mm

    Main scale reading: 116 mm. Matching line: 4.

    Reading = 116 + (4 × 0.05) = 116 + 0.20 = 116.20 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

Five more questions on the 0.05 mm caliper, with feedback after each answer.

Questions 9–12: 0.02 mm caliper

  1. Question 9: the main scale and vernier scale of a 0.02 mm vernier caliper.
    Question 9. What is the reading? Least count 0.02 mm.
    Show answer

    40.12 mm

    Main scale reading: 40 mm. Matching line: 6.

    Reading = 40 + (6 × 0.02) = 40 + 0.12 = 40.12 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  2. Question 10: the main scale and vernier scale of a 0.02 mm vernier caliper.
    Question 10. What is the reading? Least count 0.02 mm.
    Show answer

    28.14 mm

    Main scale reading: 28 mm. Matching line: 7.

    Reading = 28 + (7 × 0.02) = 28 + 0.14 = 28.14 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  3. Question 11: the main scale and vernier scale of a 0.02 mm vernier caliper.
    Question 11. What is the reading? Least count 0.02 mm.
    Show answer

    54.88 mm

    Main scale reading: 54 mm. Matching line: 44.

    Reading = 54 + (44 × 0.02) = 54 + 0.88 = 54.88 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  4. Question 12: the main scale and vernier scale of a 0.02 mm vernier caliper.
    Question 12. What is the reading? Least count 0.02 mm.
    Show answer

    97.18 mm

    Main scale reading: 97 mm. Matching line: 9.

    Reading = 97 + (9 × 0.02) = 97 + 0.18 = 97.18 mm.

    Open this reading in the simulator and press “Show me how” to see each step marked.

Five more questions on the 0.02 mm caliper, with feedback after each answer.

Questions 13–16: 0.001 in caliper

  1. Question 13: the main scale and vernier scale of a 0.001 in vernier caliper.
    Question 13. What is the reading? Least count 0.001 in.
    Show answer

    3.736 in

    Main scale reading: 3.725 in. Matching line: 11.

    Reading = 3.725 + (11 × 0.001) = 3.725 + 0.011 = 3.736 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  2. Question 14: the main scale and vernier scale of a 0.001 in vernier caliper.
    Question 14. What is the reading? Least count 0.001 in.
    Show answer

    2.102 in

    Main scale reading: 2.100 in. Matching line: 2.

    Reading = 2.100 + (2 × 0.001) = 2.100 + 0.002 = 2.102 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  3. Question 15: the main scale and vernier scale of a 0.001 in vernier caliper.
    Question 15. What is the reading? Least count 0.001 in.
    Show answer

    2.761 in

    Main scale reading: 2.750 in. Matching line: 11.

    Reading = 2.750 + (11 × 0.001) = 2.750 + 0.011 = 2.761 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  4. Question 16: the main scale and vernier scale of a 0.001 in vernier caliper.
    Question 16. What is the reading? Least count 0.001 in.
    Show answer

    2.875 in

    Main scale reading: 2.875 in. Matching line: 0 (the vernier zero sits on a main-scale line, so its last line matches too and the fine part is zero).

    Reading = 2.875 + (0 × 0.001) = 2.875 + 0.000 = 2.875 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

Five more questions on the 0.001 in caliper, with feedback after each answer.

Questions 17–20: 1/128 in caliper

  1. Question 17: the main scale and vernier scale of a 1/128 in vernier caliper.
    Question 17. What is the reading? Least count 1/128 in.
    Show answer

    3 29/128 in

    Main scale reading: 3 3/16 in. Matching line: 5.

    Reading = 3 3/16 + (5 × 1/128) = 3 3/16 + 5/128 = 3 29/128 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  2. Question 18: the main scale and vernier scale of a 1/128 in vernier caliper.
    Question 18. What is the reading? Least count 1/128 in.
    Show answer

    3 97/128 in

    Main scale reading: 3 3/4 in. Matching line: 1.

    Reading = 3 3/4 + (1 × 1/128) = 3 3/4 + 1/128 = 3 97/128 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  3. Question 19: the main scale and vernier scale of a 1/128 in vernier caliper.
    Question 19. What is the reading? Least count 1/128 in.
    Show answer

    2 13/64 in

    Main scale reading: 2 3/16 in. Matching line: 2.

    Reading = 2 3/16 + (2 × 1/128) = 2 3/16 + 1/64 = 2 13/64 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

  4. Question 20: the main scale and vernier scale of a 1/128 in vernier caliper.
    Question 20. What is the reading? Least count 1/128 in.
    Show answer

    4 29/64 in

    Main scale reading: 4 7/16 in. Matching line: 2.

    Reading = 4 7/16 + (2 × 1/128) = 4 7/16 + 1/64 = 4 29/64 in.

    Open this reading in the simulator and press “Show me how” to see each step marked.

Five more questions on the 1/128 in caliper, with feedback after each answer.

Questions about the practice

How do I check my answer?

Open “Show answer” under each question for the reading and the working. Each answer also has a link that opens the same reading in the simulator, where “Show me how” marks every step on the scales.

What if no vernier line seems to match exactly?

Choose the line whose neighbours miss by equal amounts in opposite directions. On a fine scale the lines on either side of the matching one miss only slightly, so look straight down at the picture and compare them.

Can I get more questions?

Yes. Each set ends with a link to a round of five new questions on the same scale in the simulator, with feedback after every answer.

Next stepPractice in the simulatorRounds of five questions on any scale, with feedback after every answer, or an exam with no feedback until the end.

All guides