Vernier caliper guides
Short, exact guides to the vernier caliper, grouped by what you need. New to it? Start with the parts, then how to read one. Every figure is drawn from the simulator's own caliper and every number is worked out by it, so the guides and the simulator always agree.
Start here
Parts and diagram
Labelled vernier caliper diagram with every part explained: outside and inside jaws, main and vernier scales, slider, locking screw, thumb wheel, depth rod.How to read
How to read a vernier caliper in four steps, with a worked example, metric and inch scales, least count, zero error, uncertainty and common mistakes.Least count
Find the least count of any vernier caliper: the formula, why it works, the least count of 0.1, 0.05 and 0.02 mm and inch calipers, and solved examples.Measuring
How to use
How to use a vernier caliper step by step: check the zero, measure outside, inside, depth and step sizes, read and record it, with a worked lab example.Zero error
What zero error is in a vernier caliper, how to find a positive or negative zero error, how to correct a reading, and solved examples on 0.1 and 0.02 mm.Accuracy
How accurate is a vernier caliper? Least count vs accuracy, how makers state maximum permissible error, where errors come from, and how a caliper is checked.Instruments
Inch calipers
How to read an inch vernier caliper: the decimal 0.001 in scale and the fractional 1/128 in scale, with worked examples, fractions and mm conversion.